Single Swing Posi-Stop

Single Swing Posi-Stop

SW-01-D $82.00


Minimum Spacing Between Two Impact Plates 1.24
Maximum Impact (Swing) Plate Protrusion 0.50
Body (Frame) L x W x H 1.24 x 1.23 x 2.12
Overall on Guide Rail W x H 2.00 x 2.25
S/S Thumb Screw Thread Size x Length 10-24 x 0.69
S/S Thumb Screw Head DIA x Height 0.25 x 0.25
Impact Plate Overall L x W x Thickness 1.00 x 1.62 x 0.25
Lock Plate Overall L x H x Thickness 1.22 x 0.75 x 0.75
Socket Head Lock Screw (Thread Size x Length) 1/4 - 20 x 1.25
Unit Weight 0.40 lbs.


  • Impact plate protrusion is controlled with stainless steel thumb screw or (optional) with set screw and hex driver.
  • Swing Stop is locked in place with two socket head screws and dual hole lock plate providing high locking capacity.
  • Gravity action of the swing (impact) plate is supported by compression spring with low (.20 lbs) retraction force.
  • Impact plate can be pulled from the body (for cleaning) without removing it from the Guide Rail.
  • Stop can be positioned at desired location by aligning the graduation lines on the tape with L/H or R/H top edge of the block.
  • Stop body is machined from 6061-T6 anodized aluminum, impact plates are machined from 304 stainless steel and lock plates are machined from 01 tool steel.
  • Minimum workpiece thickness is 3/8".

close window